Tools:
Please note: you don’t need all of these tools + gadgets! I’m just linking everything we used so that you can reference them if it’s something you’d like for yourself.
- Drill
- Miter Saw
- Circular Saw + Rigid Foam Insulation to cut on
- Brad Nailer
- Kreg 720 Pocket Hole Jig
- Random Orbital Sander
- Kreg Accu-Cut
- Kreg Multi-Mark Tool
- Kreg Drill Guide
- Kreg Drawer Slide Installation Guide
- Easy Read Measuring Tape
- Laser Measuring Tape
- Irwin Quick Grip Clamps
- 90-Degree Angle Clamps
- Band-It Edge Trimmer
PPE:
Supplies:
- (2) ¾” 4×8 plywood (we used red oak from Lowe’s)
- (2) ½” 4×8 plywood (we used maple from Lowe’s)
- (4) 1x2x8 (we used red oak)
- (4) 2x2x3 (we used red oak)
- (4) 9/16×3/4×8 oak edge (usually found next to the oak boards, not with the trim)
- (8) 1/4x2x4 boards (we used red oak)
- Wood glue
- Stainable wood filler
- Sandpaper (120, 180, and 220-grit)
- ⅝” brad nails
- 1″ brad nails
- 1.25” brad nails
- 1” Kreg screws
- 1.25” Kreg screws – coarse thread (for when you drill into plywood)
- 1.25″ Kreg screws – fine thread (for when you drill into solid oak)
- Oak edge banding
- 8 pairs of 18” drawer slides
- Knobs or pulls for drawers
- 4 furniture feet
Ready to start building? Grab the printable plans HERE.
